Juniper ACX2000

interface
Syntax interface interface-name;
Hierarchy Level [edit bridge-domains bridge-domain-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name
bridge-domains bridge-domain-name],
[edit routing-instances routing-instance-name bridge-domains bridge-domain-name],
[edit vlans vlan-name]
Release Information Statement introduced in Junos OS Release 8.4.
Support for top-level configuration for the virtual-switch type of routing instance added
in Junos OS Release 9.2.
In Junos OS Release 9.1 and earlier, the routing instances hierarchy supported this
statement only for a VPLS instance or a bridge domain configured within a virtual switch.
Support for logical systems added in Junos OS Release 9.6.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Statement introduced in Junos OS Release 12.3X52 for ACX Series routers.
Statement introduced in Junos OS Release 15.1.
Description (MX Series routers and EX Series switches only) Specify the logical interfaces to include
in the bridge domain, VLAN, VPLS instance, or virtual switch.
Options interface-name—Name of a logical interface. For more information about how to configure
logical interfaces, see the Junos OS Network Interfaces Library for Routing Devices.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring a Bridge Domain
• Configuring a Layer 2 Virtual Switch
• Configuring a Layer 2 Virtual Switch
• Tunnel Services Overview
• Tunnel Interface Configuration on MX Series Routers Overview
1569Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements