step-percent (RFC 2544 Benchmarking)
Syntax step-percent percent;
Hierarchy Level [edit services rpm rfc2544-benchmarking profilestest-profile profile-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the step percentage for frame-loss tests. This parameter is not applicable for
other type of tests. If you do not configure this parameter, the default step-percent is 10
percent.
Options percent—Step percent for frame-loss tests.
Default: 10 percent
Range: 1 through 100 percent
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1734
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
