show ptp clock
Syntax show ptp clock
Release Information Command introduced in Junos OS Release 12.2.
Command introduced in Junos OS Release 12.3 for ACX Series Routers.
Command introduced in Junos OS Release 17.3 for QFX Series switches.
Description (ACX Series, MX80, MX240, MX480, MX960 routers, and QFX Series switches) Display
the details of the clock configured on the node.
Options This command has no options.
Required Privilege
Level
view
Related
Documentation
IEEE 1588v2 PTP Boundary Clock Overview on page 234•
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
List of Sample Output show ptp clock on page 2938
show ptp clock (ACX Series Routers) on page 2938
Output Fields Table 208 on page 2936 lists the output fields for the show ptp clock command. Output
fields are listed in the approximate order in which they appear.
Table 208: show ptp clock Output Fields
Field DescriptionField Name
Number of the FPC or MIC slot.Slot Number
Whether the clock provides time information which is a combination of an event message and a
subsequent general message: True or False.
Two-step Clock
Clock identity of the slave or client as defined in IEEE 1588.Clock Identity
Total number of PTP ports on the router.Total Ports on Device
Attribute of an ordinary or boundary clock that denotes the traceability of the time or frequency
distributed by the grandmaster clock.
Clock Class
Indicates the expected accuracy of a clock when it is the grandmaster, or in the event it becomes the
grandmaster.
Clock Accuracy
Copyright © 2017, Juniper Networks, Inc.2936
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
