promiscuous-mode
Syntax promiscuous-mode {
vpi vpi-identifier;
}
Hierarchy Level [edit interfaces interface-name atm-options]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Description For ATM interfaces with atm-ccc-cell-relay encapsulation, map all incoming cells from
either an interface port or a VP to a single label-switched path (LSP) without restricting
the VCI number. Promiscuous mode allows you to map traffic from all 65,535 VCIs to a
single LSP, or from all 256 VPIs to a single LSP.
NOTE: In ACX Series routers, the statement supports only Inverse Multiplexing
for ATM (IMA).
Options vpi-identifier—Open this VPI in promiscuous mode.
Range: 0 through 255
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Configuring ATM Cell-Relay Promiscuous Mode
• vpi (ATM CCC Cell-Relay Promiscuous Mode) on page 1776
Copyright © 2017, Juniper Networks, Inc.1682
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
