forwarding-class (RFC 2544 Benchmarking)
Syntax forwarding-class class-name;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the forwarding class to be used for test frames. The forwarding class specifies
the manner in which the test frames are processed by the Packet Forwarding Engine of
the router. If you do not configure this parameter, test frames are treated as best-effort
traffic.
Options class-name—Name of the forwarding class. You must have previously configured this
forwarding class by including the forwarding-class statement at the [edit
class-of-service interfaces interface-name unit logical-unit-number] hierarchy level.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
1529Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
