show isis statistics
List of Syntax Syntax on page 2711
Syntax (EX Series Switches and QFX Series) on page 2711
Syntax show isis statistics
<instance instance-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches and QFX
Series)
show isis statistics
<instance instance-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 12.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Display statistics about IS-IS traffic.
Options none—Display IS-IS traffic statistics for all routing instances.
instance instance-name—(Optional) Display statistics for the specified routing instance.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
Required Privilege
Level
view
Related
Documentation
clear isis statistics•
List of Sample Output show isis statistics on page 2713
Output Fields Table 162 on page 2712 describes the output fields for the show isis statistics command.
Output fields are listed in the approximate order in which they appear.
2711Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
