Juniper ACX2000 Configuration Guide

show chassis temperature-thresholds
List of Syntax Syntax on page 2393
Syntax (TX Matrix Routers) on page 2393
Syntax (TX Matrix Plus Routers) on page 2393
Syntax (MX Series Routers) on page 2393
Syntax (MX104, MX2010, MX2020, MX10003, and MX2008 3D Universal Edge
Routers) on page 2393
Syntax (QFX Series) on page 2393
Syntax (PTX Series) on page 2393
Syntax show chassis temperature-thresholds
Syntax (TX Matrix
Routers)
show chassis temperature-thresholds
<lcc number | scc>
Syntax (TX Matrix Plus
Routers)
show chassis temperature-thresholds
<lcc number | sfc number>
Syntax (MX Series
Routers)
show chassis temperature-thresholds
<all-members>
<local>
<member member-id>
<satellite [slot-id slot-ID |device-alias alias-name]>
Syntax (MX104,
MX2010, MX2020,
show chassis temperature-thresholds
MX10003, and
MX2008 3D Universal
Edge Routers)
Syntax (QFX Series) show chassis temperature-thresholds
<interconnect-device name>
<node-device name>
Syntax (PTX Series) show chassis temperature-thresholds
Release Information Command introduced in Junos OS Release 8.0.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc command introduced in Junos OS Release 9.6 for the TX Matrix Plus router.
Command introduced in Junos OS Release 11.1 for QFX Series.
Command introduced in Junos OS Release 12.1 for T4000 Core Routers.
Command introduced in Junos OS Release 12.1X48 for PTX Series Packet Transport
Routers.
Command introduced in Junos OS Release 12.3 for MX2010 and MX2020 3D Universal
Edge Routers.
Command introduced in Junos OS Release 13.2 for MX104 3D Universal Edge Routers.
2393Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English