satellite option introduced in Junos OS Release 14.2R3.
Command introduced in Junos OS Release 17.2 for MX2008 3D Universal Edge Routers.
Command introduced in Junos OS Release 17.2 for PTX10008 Routers.
Command introduced in Junos OS Release 17.3 for MX10003 3D Universal Edge Routers.
Description Display chassis temperature threshold settings, in degrees Celsius.
Options none—Display the temperature threshold details.
all-members—(MX Series routers only) (Optional) Display the chassis temperature
threshold settings of all member routers in the Virtual Chassis configuration.
interconnect-device name—(QFabric systems only) (Optional) Display the chassis
temperature threshold settings of the Interconnect device.
lcc number—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display the temperature threshold details of a specified T640 router (line-card
chassis) that is connected to a TX Matrix router. On a TX Matrix Plus router, display
the temperature threshold details of a specified router (line-card chassis) that is
connected to a TX Matrix Plus router.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display the chassis temperature threshold
settings of the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display the chassis temperature
threshold settings of the specified member of the Virtual Chassis configuration.
Replace member-id with a value of 0 or 1.
node-device name—(QFabric systems only) (Optional) Display the chassis temperature
threshold settings of the Node device.
satellite [slot-id slot-ID | device-alias alias-name]—(Junos Fusion only) (Optional)
Display the chassis temperature threshold settings for the specified satellite device
or devices in a Junos Fusion, or for all satellite devices if no satellite devices are
specified.
scc—(TX Matrix routers only) (Optional) Display the temperature threshold details of
the TX Matrix router (switch-card chassis).
Copyright © 2017, Juniper Networks, Inc.2394
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
