disable-signature-check (RFC 2544 Benchmarking)
Syntax disable-signature-check;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 15.1 for MX104 3D Universal Edge routers.
Description Disable signature verification on the received test frames. This statement is valid only if
you configure the test mode to be a reflector. The configuration is useful when the test
traffic is generated using a third-party vendor tool, instead of an ACX Series router.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC2544-Based Benchmarking Tests Overview
• Supported RFC2544-Based Benchmarking Statements on MX104 Routers
• Configuring an RFC 2544-Based Benchmarking Test
Copyright © 2017, Juniper Networks, Inc.1488
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
