Juniper ACX2000 Configuration Guide

active
Syntax (active | passive);
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options (aggregate | generate | static) (defaults | route)],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name (aggregate | generate | static) (defaults | route)],
[edit logical-systems logical-system-name routing-options (aggregate | generate | static)
(defaults | route)],
[edit logical-systems logical-system-name routing-options rib routing-table-name (aggregate |
generate | static) (defaults | route)],
[edit routing-instances routing-instance-name routing-options (aggregate | generate | static)
(defaults | route)],
[edit routing-instances routing-instance-name routing-options rib routing-table-name
(aggregate | generate | static) (defaults | route)],
[edit routing-options (aggregate | generate | static) (defaults | route)],
[edit routing-options rib routing-table-name (aggregate | generate | static) (defaults | route)]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for the QFX Series.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Statement introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Description Determine whether static, aggregate, or generated routes are removed from the routing
and forwarding tables when they become inactive. Static routes are only removed from
the routing table if the next hop becomes unreachable. This can occur if the local or
neighbor interface goes down. Routes that have been configured to remain continually
installed in the routing and forwarding tables are marked with reject next hops when they
are inactive.
• active—Remove a route from the routing and forwarding tables when it becomes
inactive.
• passive—Have a route remain continually installed in the routing and forwarding tables
even when it becomes inactive.
Include the active statement when configuring an individual route in the route portion of
the static statement to override a passive option specified in the defaults portion of the
statement.
Default active
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
Example: Summarizing Static Routes Through Route Aggregation•
Copyright © 2017, Juniper Networks, Inc.1418
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English