show path-computation-client active-pce
Syntax show path-computation-client active-pce
<brief | detail>
Release Information Command introduced in Junos OS Release 12.3.
Command introduced in Junos OS Release 16.1R3 for QFX10000 switches.
Command introduced in Junos OS Release 17.1R1 for ACX Series routers.
Description Displays information about the current active Path Computation Element (PCE).
Options none—Display brief information about the current active PCE.
brief | detail—(Optional) Display the specific level of output.
Required Privilege
Level
view
Related
Documentation
request path-computation-client active-pce on page 1806•
List of Sample Output show path-computation-client active-pce on page 2886
show path-computation-client active-pce detail on page 2887
Output Fields Table 195 on page 2884 describes the output fields for the show path-computation-client
active-pce command. Output fields are listed in the approximate order in which they
appear.
Table 195: show path-computation-client active-pce Output Fields
Level of OutputField DescriptionField Name
All levelsIP address of the current active PCE.IP address
All levelsActive PCE priority.Priority
All levelsActive PCE state:
• PCE_STATE_NEW— Initial PCEP session state.
• PCE_STATE_RECONNECT—Trying to re-establish TCP connection with the PCEP peer.
• PCE_STATE_CONNECTING—Establishing TCP connection with the PCEP peer.
• PCE_STATE_CONNECTED—TCP connection established with the PCEP peer.
• PCE_STATE_SYNC—Open messages exchanged with the PCEP peer and entering
SYNC state.
• PCE_STATE_UP—PCEP session established.
PCE status
Copyright © 2017, Juniper Networks, Inc.2884
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
