protect core
Syntax protect core;
Hierarchy Level [edit routing-instances routing-instance-name routing-options]
Release Information Statement introduced in Junos OS Release 13.2.
Support in Layer 3 VPN routers is extended to BGP PIC with multiple routes in the global
tables such as inet and inet6 unicast, and inet and inet6 labeled unicast in Junos OS
Release 15.1.
Support for Resource Reservation Protocol (RSVP) introduced in Junos OS Release 16.1.
Description In an MPLS VPN Core network, enable BGP Prefix-Independent Convergence (PIC) Edge
to install a VPN route in the forwarding table for use as an alternate path when a provider
edge (PE) router fails or connectivity to a PE router is lost. This alternate link is used until
global convergence through the interior gateway protocol (IGP) occurs. Both OSPF with
LDP or RSVP, and IS-IS with LDP or RSVP are supported.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring BGP PIC Edge for MPLS Layer 3 VPNs
• Example: Configuring Provider Edge Link Protection in Layer 3 VPNs
• Introduction to Configuring Layer 3 VPNs on page 828
• LDP Operation
• Understanding Multiprotocol BGP
1679Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
