Juniper ACX2000 Configuration Guide

pcep
Syntax pcep {
message-rate-limit messages-per-minute;
pce pce-id {
delegation-cleanup-timeout seconds;
delegation-priority priority-number;
destination-ipv4-address ipv4-address;
destination-port port-number;
max-unknown-messages messages-per-minute;
pce-group pce-group-name;
pce-type {
active stateful;
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag (all | pcep);
no-remote-trace;
}
}
pce-group pce-group-id {
delegation-cleanup-timeout seconds;
max-unknown-messages messages-per-minute;
pce-type {
active stateful;
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag (all | pcep);
no-remote-trace;
}
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag;
no-remote-trace;
}
update-rate-limit updates-per-minute;
}
Hierarchy Level [edit protocols]
Release Information Statement introduced in Junos OS Release 12.3.
Statement introduced in Junos OS Release 16.3R for QFX10000 switches.
Support for ACX Series added in Junos OS Release 17.1R1.
Description Configure the Path Computation Client (PCC) parameters.
The remaining statements are explained separately. See CLI Explorer.
1657Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English