ipv4-dscp
Syntax ipv4-dscp number
Hierarchy Level [edit protocols ptp]
Description Specify the value used as the DiffServ code point (DSCP) value for all Precision Time
Protocol (PTP) IPv4 packets originated by the router.
Options number—DiffServ code point (DSCP) value for all PTP IPv4 packets originated by the
router.
Range: 0 through 63
Default: 56
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
ip-swap (RFC 2544 Benchmarking)
Syntax ip-swap;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Statement introduced in Junos OS Release 14.2 for MX Series routers.
Description Swaps source and destination IPv4 addresses. This statement is applicable only for
family bridge.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC2544-Based Benchmarking Tests Overview
• Configuring an RFC 2544-Based Benchmarking Test
• rfc2544-benchmarking on page 1698
1581Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
