Action Table 23 on page 151 provides links and commands for monitoring Fast Ethernet and
Gigabit Ethernet interfaces.
Table 23: Checklist for Monitoring Fast Ethernet and Gigabit Ethernet
Interfaces
Command or ActionTasks
Monitor Fast Ethernet and Gigabit Ethernet Interfaces
show interfaces terse (fe* | ge*)1. Display the Status of Fast Ethernet Interfaces
show interfaces (fe-fpc/pic/port | ge-fpc/pic/port)2. Display the Status of a Specific Fast Ethernet or Gigabit
Ethernet Interface
show interfaces (fe-fpc/pic/port | ge-fpc/pic/port) extensive3. Display Extensive Status Information for a Specific Fast
Ethernet or Gigabit Ethernet Interface
monitor interface (fe-fpc/pic/port | ge-fpc/pic/port)4. Monitor Statistics for a Fast Ethernet or Gigabit Ethernet
Interface
5. Fiber-Optic Ethernet Interface Specifications
Meaning You can use the above described commands to monitor and to display the configurations
for Fast Ethernet and Gigabit Ethernet interfaces.
Related
Documentation
Display the Status of Gigabit Ethernet Interfaces•
• Display the Status of Fast Ethernet Interfaces
Checklist for Monitoring T1 Interfaces
Purpose To monitor T1 interfaces and begin the process of isolating T1 interface problems when
they occur.
Action Table 24 on page 151 provides the links and commands for monitoring T1 interfaces.
Table 24: Checklist for Monitoring T1 Interfaces
Command or ActionTasks
Monitor T1 Interfaces
show interfaces terse t1*1. Display the Status of T1 Interfaces
show interfaces t1-fpc/pic/port2. Display the Status of a Specific T1 Interface
show interfaces t1-fpc/pic/port extensive3. Display Extensive Status Information for a Specific T1
Interface
monitor interface t1-fpc/pic/port4. Monitor Statistics for a T1 Interface
151Copyright © 2017, Juniper Networks, Inc.
Chapter 4: Configuring Interfaces and Chassis
To Next Page
Loading...
Need help?
General
