show ptp statistics
Syntax show ptp statistics
<brief | detail>
Release Information Command introduced in Junos OS Release 12.3.
Command introduced in Junos OS Release 17.3 for the QFX Series.
Description Display information about Precision Time Protocol (PTP) statistics.
Options brief—Display brief statistics about the operation of configured PTP clocks.
detail—Display detailed statistics about the operation of configured PTP clocks.
Required Privilege
Level
view
Related
Documentation
IEEE 1588v2 PTP Boundary Clock Overview on page 234•
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
List of Sample Output show ptp statistics on page 2949
show ptp statistics (with IPv6 addresses for PTP master/slave) on page 2949
show ptp statistics detail on page 2949
show ptp statistics detail (with IPv6 addresses for PTP master/slave) on page 2950
Output Fields Table 212 on page 2948 lists the output fields for the show ptp statistics command. Output
fields are listed in the approximate order in which they appear.
Table 212: show ptp statistics Output Fields
Field DescriptionField Name
IP address of the local PTP master and slave interfaces.Local Address
IP address of the remote PTP master and slave interfaces.Remote Address
Function performed by an Ethernet interface configured as a slave or master.Role
Stream ID uniquely identifies the connection between one master and one slave.Stream
1588v2 packets received by the master or slave interface.Received
1588v2 packets transmitted by the master or slave interface.Transmitted
Copyright © 2017, Juniper Networks, Inc.2948
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
