Juniper ACX2000 Configuration Guide

Table 212: show ptp statistics Output Fields (continued)
Field DescriptionField Name
Packet count for signalling messages:
• Rx—Number of packets received.
• Tx—Number of packets transmitted.
Signalling
Packet count for announce messages:
• Rx—Number of packets received.
• Tx—Number of packets transmitted.
Announce
Packet count for synchronization messages:
• Rx—Number of packets received.
• Tx—Number of packets transmitted.
Sync
Packet count for delay request or response messages:
• Rx—Number of packets received.
• Tx—Number of packets transmitted.
Delay
Packet count for signal loss errors:
• Rx—Number of packets received with errors.
• Tx—Number of packets transmitted with errors.
Error
Sample Output
show ptp statistics
user@host> show ptp statistics
Local Address Remote Address Role Stream Received Transmitted
2.2.2.2 10.10.20.50 Slave 0 45716 22826
6.6.6.2 6.6.6.1 Master 4 24960 74880
show ptp statistics (with IPv6 addresses for PTP master/slave)
user@host> show ptp statistics
Local Clock Remote Clock Role Stream
Received Transmitted
ge-0/1/5.0 2001:cdba:0000:0000:0000:0000:3257:9653 Master 4
727205 345698
ge-0/2/0.0 2001:cdba:0000:0000:0000:0000:3256:0101 Master 5
4493776 2222524
show ptp statistics detail
user@host> show ptp statistics detail
Local Address Remote Address Role Stream Received Transmitted
2.2.2.2 10.10.20.50 Slave 0 47009 23470
Signalling Announce Sync Delay Error
Rx: 5 184 23399 23426 0
Tx: 45 0 0 23426 0
2949Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English