Configuring Static MAC Addresses for Logical Interfaces in a Bridge Domain in ACX
Series
You can manually add static MAC entries for the logical interfaces in a bridge domain.
You can specify one or more static MAC addresses for each logical interface.
To add a static MAC address for a logical interface in a bridge domain, include the
static-mac mac-address statement at the [edit bridge-domains bridge-domain-name
bridge-options interface interface-name] hierarchy level.
[edit]
bridge-domains {
bridge-domain-name {
bridge-options {
interface interface-name {
static-mac mac-address {
}
}
}
}
}
Related
Documentation
Layer 2 Bridge Domains on ACX Series Overview on page 755•
• Q-in-Q Tunneling on ACX Series Overview on page 770
• Layer 2 Learning and Forwarding for Bridge Domains Overview on page 759
• Configuring a Bridge Domain on ACX Series Routers on page 760
• Configuring Q-in-Q Tunneling on ACX Series on page 771
• Configuring VLAN Identifiers for Bridge Domains in ACX Series on page 764
• Disabling MAC Learning for Bridge Domains on ACX Series on page 765
• Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series on
page 766
Configuring the Size of the MAC Address Table for Bridge Domains in ACX Series
You can modify the size of the MAC address table for each bridge domain. The default
table size is 5120 addresses per bridge domain. The minimum you can configure is 1
address, and the maximum is 32,000 addresses.
If the MAC table limit is reached, new addresses can no longer be added to the table.
NOTE: Unused MAC addresses are removed from the MAC address table
automatically. This frees space in the table thereby allowing new entries to
be added.
Copyright © 2017, Juniper Networks, Inc.766
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
