slave (ACX Series)
Syntax slave {
announce-interval announce-interval-value;
announce-timeout announce-timeout-value;
clock-class-to-quality-level-mapping {
quality-level (prc | prs |sec | smc | ssu-a | ssu-b | st2 | st3 | st3e | st4 | stu | tnc);
}
convert-clock-class-to-quality-level;
delay-request delay-request-value;
grant-duration interval;
interface interface-name {
unicast-mode {
clock-source ip-address {
local-ip-address local-ip-address;
asymmetry number;
}
}
transport ipv4;
}
}
sync-interval interval;
}
}
Hierarchy Level [edit protocols ptp]
Release Information Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 12.2 for the ACX Series Universal Access
Routers.
Description Configure the slave with parameters.
Options The remaining statements are explained separately. See CLI Explorer.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• IEEE 1588v2 Precision Timing Protocol (PTP) on ACX Series Universal Access Routers
on page 237
• Precision Time Protocol Overview
Copyright © 2017, Juniper Networks, Inc.1720
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
