no-vrf-advertise
Syntax no-vrf-advertise;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name],
[edit routing-instances routing-instance-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Description Prevent advertising VPN routes from a VRF routing instance to remote PE routers.
Within a hub-and-spoke configuration, you can configure a PE router to not advertise
VPN routes from the primary (hub) routing instance. Instead, these routes are advertised
from the secondary (downstream) routing instance. You can do this without configuring
routing table groups, by using the no-vrf-advertise statement.
NOTE: This statement does not prevent the exportation of VPN routes to
other VRF routing instances on the same router by configuring the [edit
routing-options auto-export] statement.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring Policies for the VRF Table on PE Routers in VPNs
• Configuring Hub-and-Spoke VPN Topologies: One Interface
• Limiting Routes to Be Advertised by an MVPN VRF Instance
• vrf-advertise-selective
1641Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
