• Configuring Point-to-Multipoint LSPs for an MBGP MVPN
• Flooding Unknown Traffic Using Point-to-Multipoint LSPs in VPLS
• Configuring RSVP Automatic Mesh
link-protection (Host Fast Reroute)
Syntax link-protection;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options interface interface-name],
[edit routing-instances routing-instance-name routing-options interface interface-name]
Release Information Statement introduced in Junos OS Release 12.2.
Description Enable link protection on a specified interface in a routing instance.
Configuring link protection on an interface ensures that traffic is rerouted to the destination
device through alternate loop-free paths that traverse the protected interface.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Example: Configuring Link Protection with Host Fast Reroute
local-gateway (IPSec)
Syntax local-gateway address <gw-interface interface-name.logical-unit-number>;
Hierarchy Level [edit services service-set service-set-name ipsec-vpn-options]
Release Information Statement introduced before Junos OS Release 7.4.
Description Define the local IPv4 or IPv6 address for the IPsec traffic.
Options address—Local address.
The remaining statement is explained separately.
Required Privilege
Level
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Related
Documentation
• Configuring Service Rules
1587Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
