Juniper ACX2000

}
}
fragmentation-maps {
frag {
forwarding-class {
best-effort {
multilink-class 3;
}
network-control {
multilink-class 0;
}
assured-forwarding {
multilink-class 2;
}
expedited-forwarding {
multilink-class 1;
}
}
}
}
schedulers {
new {
transmit-rate 32k;
shaping-rate 3m;
priority low;
drop-profile-map loss-priority low protocol any drop-profile dp1;
drop-profile-map loss-priority high protocol any drop-profile dp2;
}
new_nc {
transmit-rate 32k;
shaping-rate 3m;
priority strict-high;
}
new_af {
transmit-rate 32k;
shaping-rate 3m;
priority medium-low;
}
new_ef {
transmit-rate 32k;
shaping-rate 3m;
priority medium-high;
}
}
}
Example: Configuring an MLPPP Bundle on ACX Series
The following is a sample for configuring an MLPPP bundle on ACX Series routers:
[edit]
user@host# show interfaces
lsq-1/1/0 {
description LSQ-interface;
per-unit-scheduler;
525Copyright © 2017, Juniper Networks, Inc.
Chapter 17: Configuring MLPPP