show route flow validation
List of Syntax Syntax on page 3043
Syntax (EX Series Switches) on page 3043
Syntax show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
<logical-system (all | logical-system-name)>
Syntax (EX Series
Switches)
show route flow validation
<brief | detail>
<ip-prefix>
<table table-name>
Release Information Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Description Display flow route information.
Options none—Display flow route information.
brief | detail—(Optional) Display the specified level of output. If you do not specify a
level of output, the system defaults to brief.
ip-prefix—(Optional) IP address for the flow route.
logical-system (all | logical-system-name)—(Optional) Perform this operation on all
logical systems or on a particular logical system.
table table-name—(Optional) Display flow route information for all routing tables whose
name begins with this string (for example, inet.0 and inet6.0 are both displayed
when you run the show route flow validation inet command).
Required Privilege
Level
view
List of Sample Output show route flow validation on page 3044
show route flow validation (IPv6) on page 3044
Output Fields Table 222 on page 3043 lists the output fields for the show route flow validation command.
Output fields are listed in the approximate order in which they appear.
Table 222: show route flow validation Output Fields
Level of OutputField DescriptionField Name
All levelsName of the routing table (for example, inet.0).routing-table-name
3043Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
