Juniper ACX2000

Options The remaining statements are explained separately.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Filtering Packets in Layer 3 VPNs Based on IP Headers
• Configuring EXP-Based Traffic Classification for VPLS
• Load Balancing and IP Header Filtering for Layer 3 VPNs
wait-to-restore (Chassis Synchronization Source)
Syntax wait-to-restore minutes;
Hierarchy Level [edit chassis synchronization source interfaces]
Release Information Statement introduced in Junos OS Release 12.2 for ACX Series Routers.
Description Specify a time for each port to be up before opening the Ethernet Synchronization Message
Channel (ESMC). When a port’s signal transitions out of the signal fail state, it must be
fault free for the wait-to-restore time before it is again considered by the selection process.
Options minutes—From 0 to 12 minutes
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• External Clock Synchronization Overview for ACX Series Routers on page 226
• Configuring External Clock Synchronization for ACX Series Routers on page 228
• Synchronous Ethernet Overview
• show chassis synchronization on page 2386
Copyright © 2017, Juniper Networks, Inc.1780
ACX Series Universal Access Router Configuration Guide