show validation group
Syntax show validation group
<instance instance-name>
<logical-system logical-system-name>
Release Information Command introduced in Junos OS Release 12.2.
Description Display information about route validation redundancy groups.
Options none—Display information about all route validation groups.
instance instance-name—(Optional) Display information about route validation groups
for the specified routing instance. The instance name can be master for the main
instance, or any valid configured instance name or its prefix.
logical-system logical-system-name—(Optional) Perform this operation on a particular
logical system.
Required Privilege
Level
view
Related
Documentation
Use Case and Benefit of Origin Validation•
• Understanding Origin Validation for BGP
• Example: Configuring Origin Validation for BGP
List of Sample Output show validation group on page 3185
Output Fields Table 236 on page 3184 describes the output fields for the show validation group command.
Output fields are listed in the approximate order in which they appear.
Table 236: show validation group Output Fields
Field DescriptionField Name
Group name.Group
Number of concurrent sessions for each group. The default is 2. The number
is configurable with the max-sessions statement.
Maximum sessions
Resource public key infrastructure (RPKI) cache session IP address.Session
State of the connection between the routing device and the cache server. Up
means that the connection is established. Connect means that the connection
is not established.
State
Copyright © 2017, Juniper Networks, Inc.3184
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
