Juniper ACX2000 Configuration Guide

List of Sample Output show validation database on page 3183
Output Fields Table 235 on page 3183 describes the output fields for the show validation database
command. Output fields are listed in the approximate order in which they appear.
Table 235: show validation database Output Fields
Level of
OutputField DescriptionField Name
All levelsRoute validation (RV) record prefix.
RV records are received from the cache server and can also be
configured statically at the [edit routing-options validation static]
hierarchy level .
Prefix
All levelsLegitimate originator autonomous system (AS).Origin-AS
All levelsIP address of the RPKI cache server.Session
All levelsState of the route validation records. The state can be valid, invalid
or unknown.
State
All levelsConflicting origin-autonomous-system information between RPKI
caches when nonstop active routing (NSR) is configured.
Mismatch
All levelsNumber of IPv4 route validation records.IPv4 records
All levelsNumber of IPv6 route validation records.IPv6 records
Sample Output
show validation database
user@host> show validation database
RV database for instance master
Prefix Origin-AS Session State Mismatch
172.16.1.0/24-32 1 10.0.77.1 valid
172.16.2.0/24-32 2 10.0.77.1 valid
172.16.3.0/24-32 3 10.0.77.1 valid
172.16.4.0/24-32 4 10.0.77.1 valid
172.16.5.0/24-32 5 10.0.77.1 valid
172.16.6.0/24-32 6 10.0.77.1 valid
172.16.7.0/24-32 7 10.0.77.1 valid
172.16.8.0/24-32 8 10.0.77.1 valid
72.9.224.0/19-24 26234 192.168.1.100 valid *
72.9.224.0/19-24 3320 192.168.1.200 invalid *
10.0.0.0/8-32 0 internal valid
IPv4 records: 14
IPv6 records: 0
3183Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English