show ppp statistics
Syntax show ppp statistics
<detail>
<memory>
<recovery>
Release Information Command introduced in Junos OS Release 7.5.
Description Display PPP interface statistics information.
Options detail—(Optional) Display the detailed statistics.
memory—(Optional) Display PPP process memory statistics.
recovery—(Optional) Display recovery state of PPP after a GRES or restart. It is safe to
force another GRES or restart only when the recovery state indicates the recovery
is done.
NOTE: When you issue this command option during the recovery process,
the command may time out or fail silently rather than display output.
Recovery is not complete until the command displays Recovery state:
recovery done.
Required Privilege
Level
view
List of Sample Output show ppp statistics on page 2914
show ppp statistics detail on page 2914
show ppp statistics recovery (Safe to Restart) on page 2915
show ppp statistics recovery (Unsafe to Restart) on page 2915
Output Fields Table 201 on page 2909 lists the output fields for the showppp statistics command. Output
fields are listed in the approximate order in which they appear.
Table 201: show ppp statistics Output Fields
Level of OutputField DescriptionField Name
none detailNumber of PPP sessions on an interface.Total sessions
2909Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands
To Next Page
Loading...
Need help?
General
