Juniper ACX2000

source-ipv4-address (RFC 2544 Benchmarking)
Syntax source-ipv4-address address;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specify the source IPv4 address to be used in generated test frames. This parameter is
optional for both circuit cross-connect (CCC) and, inet , and also for bridge family. If you
do not configure the source IPv4 address for an inet family, the source address of the
interface is used to transmit the test frames.
Options address—Valid IPv4 address.
Default: If you do not configure the source IPv4 address for a CCC family and bridge
family, the default value of 192.168.1.10 is used.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
Copyright © 2017, Juniper Networks, Inc.1724
ACX Series Universal Access Router Configuration Guide