transmit-failure-threshold (RFC 2544 Benchmarking)
Syntax transmit-failure-threshold;
Hierarchy Level [edit services rpm rfc2544-benchmarkingtests test-name test-name]
Release Information Statement introduced in Junos OS Release 12.3X53 for ACX Series routers.
Description Specifies the failure threshold value of the transmit test frames.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• RFC 2544-Based Benchmarking Tests Overview on page 1335
• Configuring RFC 2544-Based Benchmarking Tests on page 1341
• rfc2544-benchmarking on page 1698
trigger (Chassis Alarm Relay Input)
Syntax trigger (ignore | red | yellow);
Hierarchy Level [edit chassis alarm relay input port port-number ]
Release Information Statement introduced in Junos OS Release 12.3.
Description Configure the alarm input contact port to respond to alarms or to ignore alarms.
Options ignore—Do not assert any alarm signals.
red—Assert the red system alarm.
yellow—Assert the yellow system alarm.
Required Privilege
Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• User-Defined Alarm Relay Overview on page 158
• show chassis craft-interface on page 1865
• show chassis alarms on page 1845
1763Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
Need help?
General
