source-address (Routing Options)
Syntax source-address address;
Hierarchy Level [edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options dynamic-tunnels tunnel-name,
[edit logical-systems logical-system-name routing-options dynamic-tunnels tunnel-name],
[edit routing-instances routing-instance-name routing-options dynamic-tunnels tunnel-name],
[edit routing-options dynamic-tunnels tunnel-name]
Release Information Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Description Specify the source address for the generic routing encapsulation (GRE) tunnels. The
source address specifies the address used as the source for the local tunnel endpoint.
This address can be any local address on the router, typically the router ID or the loopback
address.
Options address—Name of the source address.
Required Privilege
Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Related
Documentation
• Configuring GRE Tunnels for Layer 3 VPNs
Copyright © 2017, Juniper Networks, Inc.1722
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
