}
Related
Documentation
Controlling Network Access Using Traffic Policing Overview on page 908•
• ACX Series Universal Access Router Overview on page 3
• ACX1000 and ACX1100 Routers Hardware and CLI Terminology Mapping on page 30
• ACX2000 and ACX2100 Routers Hardware and CLI Terminology Mapping on page 33
Standard SNMP MIBs Supported by Junos OS
Junos OS supports the Standard MIBs listed in Table 60 on page 967.
NOTE: For details on SNMP MIB support on EX4600 switches, QFX Series
switches, and QFabric systems, see SNMP MIBs Support.
Table 60: Standard MIBs supported by Junos OS
PlatformsExceptionsStandard MIB
EX Series and MX SeriesEX Series implementation of LLDP MIB
supports both IPv4 and IPv6
configuration.
IEEE 802.1ab section 12.1, Link Layer
Discovery Protocol (LLDP) MIB
EX Series, M Series, MX Series, PTX
Series, SRX Series, T Series, and vSRX
Supported tables and objects:
•
dot3adAggPortTable,
dot3adAggPortListTable,
dot3adAggTable, and
dot3adAggPortStatsTable
NOTE: EX Series switches do not
support the dot3adAggPortTable and
dot3adAggPortStatsTable.
•
dot3adAggPortDebugTable (only
dot3adAggPortDebugRxState,
dot3adAggPortDebugMuxState,
dot3adAggPortDebugActorSyncTransitionCount,
dot3adAggPortDebugPartnerSyncTransitionCount,
dot3adAggPortDebugActorChangeCount,
and
dot3adAggPortDebugPartnerChangeCount)
NOTE: EX Series switches do not
support the
dot3adAggPortDebugTable.
•
dot3adTablesLastChanged
IEEE, 802.3ad, Aggregation of Multiple
Link Segments
967Copyright © 2017, Juniper Networks, Inc.
Chapter 29: Understanding Network Management
To Next Page
Loading...
Need help?
General
