Juniper ACX2000 Configuration Guide

show class-of-service system-defaults
Syntax show class-of-service system-defaults
Release Information Command introduced in Junos OS Release 12.2 for the ACX Series Universal Access
routers.
Description Display classifiers configured under system-defaults.
Options —This command has no options.
Additional Information
Required Privilege
Level
view
Related
Documentation
system-defaults on page 1740•
List of Sample Output show class-of-service system-defaults on page 2450
Output Fields Table 138 on page 2450 describes the output fields for the show class-of-service
system-defaults command. Output fields are listed in the order in which they appear.
Table 138: show class-of-service system-defaults Output Fields
Field DescriptionField Name
Category of an object: ClassifierObject
Name of an objectName
Type of an object: exp is the only type allowed.Type
Index of the indicated classifierIndex
Sample Output
show class-of-service system-defaults
user@hostshow class-of-service system-defaults
Object Name Type Index
Classifier e1 exp 9280
Copyright © 2017, Juniper Networks, Inc.2450
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English