peak-rate
Syntax peak-rate peak-rate;
Hierarchy Level [edit class-of-service traffic-control-profiles traffic-control-profile-name],
[edit firewall atm-policer atm-policer-name]
Release Information Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Description (ACX Series routers) Define the top rate at which traffic can burst. The ATM peak cell
rate on ATM IMA pseudowire interfaces is in cells per second expressed as a decimal
number in which 1 cps = 384 bps. The maximum number of cells at the peak rate is
determined by the bandwidth available on the interface.
Options peak-rate—ATM peak rate in cells per second.
Range: 61 cps through 38,641 cps
Required Privilege
Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related
Documentation
• Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895
• Configuring Policing on an ATM IMA Pseudowire on page 912
• Configuring Shaping on an ATM IMA Pseudowire on page 901
• show class-of-service traffic-control-profile
1661Copyright © 2017, Juniper Networks, Inc.
Chapter 41: Configuration Statements
To Next Page
Loading...
