Table 195: show path-computation-client active-pce Output Fields (continued)
Level of OutputField DescriptionField Name
detailNumber of unknown messages received per minute.Unknown
msgs/min rate
detailNumber of PCEP session failures with the PCE.Session failures
detailTime (in seconds) left for LSP delegation to timeout.Delegation timeout
in
detailNumber of LSP delegation failures.Delegation failures
detailTime (in seconds) since the PCEP session is down.Connection down
All levelsInformation about type, value, and number of PC Error messages sent.PCErr-sent
Sample Output
show path-computation-client active-pce
user@host> show path-computation-client active-pce
PCE pce1
General
IP address : 10.209.57.166
Priority : 2
PCE status : PCE_STATE_NEW
Session type : PCE_TYPE_STATEFULACTIVE
PCE-mastership : main
Counters
PCReqs Total: 0 last 5min: 0 last hour: 0
PCReps Total: 0 last 5min: 0 last hour: 0
PCRpts Total: 0 last 5min: 0 last hour: 0
PCUpdates Total: 0 last 5min: 0 last hour: 0
Timers
Local Keepalive timer: 0 [s] Dead timer: 0 [s]
Remote Keepalive timer: 0 [s] Dead timer: 0 [s]
Errors
PCErr-recv
PCErr-sent
Type: 19 Value: 3 Count: 1
PCE-PCC-NTFS
PCC-PCE-NTFS
Copyright © 2017, Juniper Networks, Inc.2886
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
