Juniper ACX2000 Configuration Guide

show oam ethernet connectivity-fault-management server-mep detail
user@host> show oam ethernet connectivity-fault-management server-mep 1000 detail
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
Defects:
l2circuit-defect : no
l2vpn-defect : no
link-loss-defect : no
Statistics:
Valid AISs generated : 0
show oam ethernet connectivity-fault-management server-mep brief
user@host> show oam ethernet connectivity-fault-management server-mep 1000 brief
MEP identifier: 1000, Status: up
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: down, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
show oam ethernet connectivity-fault-management server-mep extensive
user@host> show oam ethernet connectivity-fault-management server-mep 1000 extensive
MEP identifier: 1000, Status: down
Protocol: l2-circuit
Interface name: ge-0/0/0.0, Interface status: Active, Link status: Up
Ethernet-AIS status: up, Interval: 1s, Tx level: [3 ], Priority: 4
Action profile: ap
Defects:
l2circuit-defect : yes
l2vpn-defect : no
link-loss-defect : no
Statistics:
Valid AISs generated : 16
2811Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English