Juniper ACX2000 Configuration Guide

Inactive reason: No difference
Age: 4:40:52
Task: IF
AS path: I
red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden)
Restart Complete
10.12.80.0/30 (2 entries, 1 announced)
BGP Preference: 170/-101
Next-hop reference count: 6
Source: 10.12.80.1
Next hop: 10.12.80.1 via ge-6/3/2.0, selected
State: <Ext>
Inactive reason: Route Preference
Peer AS: 100
Age: 4:39:13
Task: BGP_100.10.12.80.1+179
AS path: 100 I
Localpref: 100
Router ID: 10.0.0.0
show route inactive-path extensive
The output for the show route inactive-path extensive command is identical to that of
the show route inactive-path detail command. For sample output, see show route
inactive-path detail on page 3066.
show route inactive-path terse
user@host> show route inactive-path terse
inet.0: 25 destinations, 26 routes (24 active, 0 holddown, 1 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
10.12.100.12/30 O 10 1 >so-0/3/0.0
private1__.inet.0: 2 destinations, 3 routes (2 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
10.0.0.0/8 D 0 >fxp1.0
red.inet.0: 6 destinations, 8 routes (4 active, 0 holddown, 3 hidden)
Restart Complete
+ = Active Route, - = Last Active, * = Both
A Destination P Prf Metric 1 Metric 2 Next hop AS path
10.12.80.0/30 B 170 100 >10.12.80.1 100 I
iso.0: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
Restart Complete
mpls.0: 4 destinations, 4 routes (4 active, 0 holddown, 0 hidden)
Restart Complete
3067Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English