displayed on the craft interface on the TX Matrix router and its attached T640 routers.
On a TX Matrix Plus router, show messages that are currently displayed on the craft
interface on the TX Matrix Plus router and its attached routers.
all-members—(MX Series routers only) (Optional) Display information currently on the
craft interface for all members of the Virtual Chassis configuration.
lcc number—(TX Matrix, TX Matrix Plus routers only) (Optional) On a TX Matrix router,
show messages that are currently displayed on the craft interface for a specified
T640 router (line-card chassis) that is connected to the TX Matrix router. On a TX
Matrix Plus router, show messages that are currently displayed on the craft interface
for a specified router (line-card chassis) that is connected to the TX Matrix Plus
router.
Replace number with the following values depending on the LCC configuration:
• 0 through 3, when T640 routers are connected to a TX Matrix router in a routing
matrix.
• 0 through 3, when T1600 routers are connected to a TX Matrix Plus router in a
routing matrix.
• 0 through 7, when T1600 routers are connected to a TX Matrix Plus router with 3D
SIBs in a routing matrix.
• 0, 2, 4, or 6, when T4000 routers are connected to a TX Matrix Plus router with
3D SIBs in a routing matrix.
local—(MX Series routers only) (Optional) Display information currently on the craft
interface for the local Virtual Chassis member.
member member-id—(MX Series routers only) (Optional) Display information currently
on the craft interface for the specified member of the Virtual Chassis configuration.
For an MX Series Virtual Chassis, replace member-id with a value of 0 or 1.
scc—(TX Matrix router only) (Optional) Show messages that are currently displayed on
the craft interface for the TX Matrix router (switch-card chassis).
sfc number—(TX Matrix Plus router only) (Optional) Show messages that are currently
displayed on the craft interface for the respective TX Matrix Plus router (switch-fabric
chassis). Replace number variable with 0.
Required Privilege
Level
view
Related
Documentation
clear chassis display message•
• set chassis display message
List of Sample Output show chassis craft-interface (M20 Router) on page 1868
show chassis craft-interface (M40 Router) on page 1869
Copyright © 2017, Juniper Networks, Inc.1866
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
