Juniper ACX2000 Configuration Guide

|1 Alarm active |
|Y: FERF |
| |
+--------------------+
show chassis craft-interface (M40 Router)
user@host> show chassis craft-interface
Front Panel LCD Display: enabled
Red alarm: LED off, relay off
Yellow alarm: LED off, relay off
Host OK LED: On
Host Fail LED: Off
NICs 0 1 2 3 4 5 6 7
-------------------------------
Green *. *. *. *.
Red ........
LCD Screen:
+--------------------+
|host |
|Up: 27+18:52:37 |
| |
|52.649kpps Load |
+--------------------+
show chassis craft-interface (M120 Router)
user@host> show chassis craft-interface
Front Panel System LEDs:
Routing Engine 0 1
--------------------------
OK * .
Fail . .
Master * .
Front Panel Alarm Indicators:
-----------------------------
Red LED *
Yellow LED .
Major relay *
Minor relay .
Front Panel FPC LEDs:
FPC 0 1 2 3 4 5
----------------------------
Red . . . . . .
Green . * . * * *
CB LEDs:
CB 0 1
--------------
Amber . .
Green * *
PS LEDs:
PS 0 1
------------------------
Red . .
Green * *
1869Copyright © 2017, Juniper Networks, Inc.
Chapter 42: Operational Commands

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English