Juniper ACX2000

Control channel name : ge-1/2/2.100
Interface direction : west
Ring Protection Link End : No
Signal Failure : Clear
Forward State : forwarding
Interface Admin State : IFF ready
show protection-group ethernet-ring interface (EX Series Switch Ring Node)
user@host> show protection-group ethernet-ring interface
Ethernet ring port parameters for protection group pg102
Ethernet ring port parameters for protection group pg101
Interface Forward State RPL End Signal Failure Admin State
ge-0/0/3.0 discarding Yes Clear ready
ge-0/0/9.0 forwarding No Clear ready
show protection-group ethernet-ring interface detail (ACX Series and MX Series)
user@host> show protection-group ethernet-ring interface detail
Ethernet ring port parameters for protection group Erp_1
Interface name : xe-0/0/0
Control channel name : xe-0/0/0.1
Interface direction : east
Ring Protection Link End : No
Signal Failure : Clear
Forward State : forwarding
Interface Admin State : IFF ready
Interface name : et-0/0/48
Control channel name : et-0/0/48.1
Interface direction : west
Ring Protection Link End : No
Signal Failure : Clear
Forward State : forwarding
Interface Admin State : IFF ready
Copyright © 2017, Juniper Networks, Inc.2922
ACX Series Universal Access Router Configuration Guide