Juniper ACX2000

Table 60: Standard MIBs supported by Junos OS (continued)
PlatformsExceptionsStandard MIB
All platformsSupported tables and objects:
•
isisSystem
•
isisMANAreaAddr
•
isisAreaAddr
•
isisSysProtSupp
•
isisSummAddr
•
isisCirc
•
isisCircLevel
•
isisPacketCount
•
isisISAdj
•
isisISAdjAreaAddr
•
isisAdjIPAddr
•
isisISAdjProtSupp
•
isisRa
•
isisIPRA
RFC 1195, Use of OSI IS-IS for Routing in
TCP/IP and Dual Environments
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
No exceptionsRFC 1212, Concise MIB Definitions
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
Junos OS supports the following areas:
•
MIB II and its SNMP version 2
derivatives, including:
•
Statistics counters
•
IP, except for ipRouteTable, which
has been replaced by
ipCidrRouteTable (RFC 2096, IP
Forwarding Table MIB)
•
SNMP management
•
Interface management
•
SNMPv1 Get, GetNext requests, and
version 2 GetBulk request
•
Junos OS-specific secured access list
•
Master configuration keywords
•
Reconfigurations upon SIGHUP
RFC 1213, Management Information Base
for Network Management of
TCP/IP-Based Internets: MIB-II
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
Junos OS supports only MIB II SNMP
version 1 traps and version 2 notifications.
RFC 1215, A Convention for Defining Traps
for use with the SNMP
ACX Series, M Series, SRX Series, and T
Series
Junos OS supports T1 MIB.RFC 1406, Definitions of Managed Objects
for the DS1 and E1 Interface Types
M Series and T SeriesJunos OS supports T3 MIB.RFC 1407, Definitions of Managed Objects
for the DS3/E3 Interface Type
969Copyright © 2017, Juniper Networks, Inc.
Chapter 29: Understanding Network Management