Juniper ACX2000 Configuration Guide

Table 60: Standard MIBs supported by Junos OS (continued)
PlatformsExceptionsStandard MIB
ACX Series, M Series, MX Series, PTX
Series, and T Series
MPLS tunnels as interfaces are not
supported.
mplsTunnelCHopTable is supported on
ingress routers only.
NOTE: The branch used by the
proprietary LDP MIB (ldpmib.mib)
conflicts with RFC 3812. ldpmib.mib has
been deprecated and replaced by
jnx-mpls-ldp.mib.
Unsupported tables and objects:
•
mplsTunnelResourceMeanRate in
TunnelResource table
•
mplsTunnelResourceMaxBurstSize in
TunnelResource table
•
mplsTunnelResourceMeanBurstSize in
TunnelResource table
•
mplsTunnelResourceExBurstSize in
TunnelResource table
•
mplsTunnelResourceWeight in
TunnelResource table
•
mplsTunnelPerfTable
•
mplsTunnelCRLDPResTable
RFC 3812, Multiprotocol Label Switching
(MPLS) Traffic Engineering (TE)
Management Information Base (MIB)
(read-only access)
ACX Series, M Series, MX Series, PTX
Series, SRX Series, and T Series
Unsupported tables and objects
(read-only access):
•
mplsInterfacePerfTable
•
mplsInSegmentPerfTable
•
mplsOutSegmentPerfTable
•
mplsInSegmentMapTable
•
mplsXCUp
•
mplsXCDown
RFC 3813, Multiprotocol Label Switching
(MPLS) Label Switching Router (LSR)
Management Information Base (MIB)
ACX Series, EX Series, M Series, MX
Series, PTX Series, SRX Series, and T
Series
No exceptionsRFC 3826, The Advanced Encryption
Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model
MX Series
•
Junos OS does not support the
alarmActiveStatsTable.
•
Traps that do not conform to the
alarm model are not supported.
However, these traps can be redefined
to conform to the alarm model.
RFC 3877, Alarm Management
Information Base
Copyright © 2017, Juniper Networks, Inc.978
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English