Juniper ACX2000

[edit services]
service-set service-set-name {
interface-service {
service-interface interface-name;
}
next-hop-service {
inside-service-interface interface-name.unit-number;
outside-service-interface interface-name.unit-number;
}
ipsec-vpn-options {
local-gateway (address | interface);
no-anti-replay;
}
ipsec-vpn-rules rule-name;
}
Related
Documentation
Network Address Translation Overview on page 999•
• Network Address Port Translation Overview on page 1001
• IPsec for ACX Series Overview on page 1087
• Enabling Inline Services Interface on ACX Series on page 1008
• Service Filters in ACX Series on page 1035
• Guidelines for Applying Service Filters on page 1036
• Service Filter Match Conditions for IPv4 Traffic on page 1038
• Service Filter Actions on page 1039
• Network Address Translation Address Overload in ACX Series on page 1001
• CoS for NAT Services on ACX Series Universal Access Routers on page 887
• Network Address Translation Constraints on ACX on page 1003
• Configuring Address Pools for Network Address Port Translation (NAPT) Overview on
page 1007
• Network Address Translation Rules Overview on page 1004
• Configuring Service Sets for Network Address Translation on page 1030
• Configuring Service Sets to Be Applied to Services Interfaces on page 1031
• Configuring Queuing and Scheduling on Inline Services Interface on page 1040
1091Copyright © 2017, Juniper Networks, Inc.
Chapter 33: Configuring IPsec