Juniper ACX2000 Configuration Guide

Table 94: jnxSoamLmHistoryStatsTable
DescriptionObject IDObject
Specifies the index for the Measurement
Interval within this PM session.
Measurement Interval indexes are
assigned sequentially by the SNMP
Agent. The first Measurement Interval
that occurs after the session is started is
assigned index 1. Measurement Intervals
for FLR (stored in this table) are based
on iterator count and are indexed
independently of Measurement Intervals
for availability
Referential integrity is necessary, i.e., the
index needs to be persistent upon a
reboot or restart of a device. The index is
never reused while this session is active
until it wraps to zero. The index value
keeps increasing up to that time.
jnxSoamLmHistoryStatsEntry 1jnxSoamLmHistoryStatsIndex
Specifies the time at which the
Measurement Interval ended.
jnxSoamLmHistoryStatsEntry 2jnxSoamLmHistoryStatsEndTime
Specifies the length of time that the
Measurement Interval ran for, in 0.01
seconds.
jnxSoamLmHistoryStatsEntry 3jnxSoamLmHistoryStatsElapsedTime
Indicates whether the Measurement
Interval has been marked as suspect. The
object is set to true when there is a
discontinuity in the performance
measurements during the Measurement
Interval. Conditions for a discontinuity
include, but are not limited to the
following:
1—The local time-of-day clock is adjusted
by at least 10 seconds
2—The conducting of a performance
measurement is halted before the current
Measurement Interval is completed
3—A local test, failure, or reconfiguration
that disrupts service
jnxSoamLmHistoryStatsEntry 4jnxSoamLmHistoryStatsSuspect
Contains the number of frames
transmitted in the forward direction by
this MEP. For a PM Session of types
lmLmm and lmCcm this includes
Ethernet ServiceFrames and SOAM PDUs
that are in a higher MEG level only. For a
PM Session of type lmSlm this includes
the count of OAM ETH-SLM frames only.
jnxSoamLmHistoryStatsEntry 5jnxSoamLmHistoryStatsForwardTransmittedFrames
1189Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English