Juniper ACX2000

Table 95: jnxSoamDmCfgTable (continued)
DescriptionObject IDObject
bMeasuredStatsFrameDelayBackward(37)—Enables
or disables the
jnxSoamDmMeasuredStatsFrameDelayBackward
counter.
bMeasuredStatsIfdvTwoWay(38)—Enables
or disables the
jnxSoamDmMeasuredStatsIfdvTwoWay
counter.
bMeasuredStatsIfdvForward(39)—Enables
or disables the
jnxSoamDmMeasuredStatsIfdvForward
counter.
bMeasuredStatsIfdvBackward(40)—Enables
or disables the
jnxSoamDmMeasuredStatsIfdvBackward
counter.
Specifies the interval between Delay
Measurement OAM message transmission.
For Delay Measurement monitoring
applications, the default value is 100ms. This
object can only be written at row creation
time and cannot be modified once it has
been created.
jnxSoamDmCfgEntry 6jnxSoamDmCfgMessagePeriod
Specifies the priority of frames with Delay
Measurement OAM message information.
The default value is to be the value which
yields the lowest frame loss. This object can
only be written at row creation time and
cannot be modified once it has been created.
jnxSoamDmCfgEntry 7jnxSoamDmCfgPriority
Copyright © 2017, Juniper Networks, Inc.1200
ACX Series Universal Access Router Configuration Guide