set to '1' and the selected threshold measurement is to have a threshold value configured.
Non-configured threshold measurements are disabled by default. The writable objects
in this table need to be persistent upon reboot or restart of a device.
Table 100: jnxSoamDmThresholdCfgTable
DescriptionObject IDObject
Denotes the index of the threshold
number for the specific DM threshold
entry. An index value of '1' needs to be
supported. Other index values can also
be supported.
jnxSoamDmThresholdCfgEntry 1jnxSoamDmThresholdCfgIndex
Copyright © 2017, Juniper Networks, Inc.1220
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
