Juniper ACX2000 Configuration Guide

Table 100: jnxSoamDmThresholdCfgTable (continued)
DescriptionObject IDObject
bJnxSoamDmAvgFrameDelayBackwardThreshold(18)—Enables
or disables average backward frame
delay threshold notification. The
notification is sent when at the end of a
Measurement Interval if the
jnxSoamDmCurrentStatsFrameDelayBackwardAvg
value is greater than or equal to the
threshold value.
bJnxSoamDmMeasuredIfdvBackwardThreshold(19)—Enables
or disables measured frame IFDV
backward threshold notification. The
notification is sent immediately when the
jnxSoamDmMeasuredStatsIfdvBackward
value is greater than or equal to threshold
value.
bJnxSoamDmMaxIfdvBackwardThreshold(20)—Enables
or disables maximum frame IFDV
backward threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsIfdvBackwardMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgIfdvBackwardThreshold(21)—Enables
or disables average frame IFDV backward
threshold notification. The notification is
sent when at the end of a Measurement
Interval if the
jnxSoamDmCurrentStatsIfdvBackwardAvg
value is greater than or equal to the
threshold value.
bJnxSoamDmMaxFrameDelayRangeBackwardThreshold(22)—Enables
or disables maximum Frame Delay Range
backward threshold notification. The
notification is sent immediately when the
jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax
value is greater than or equal to threshold
value in a Measurement Interval.
bJnxSoamDmAvgFrameDelayRangeBackwardThreshold(23)—Enables
or disables average Frame Delay Range
backward threshold notification. The
notification is sent when at the end of a
Measurement Interval if the
jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg
value is greater than or equal to the
threshold value.
Sets the average two-way delay
threshold value that will be used to
determine if a threshold notification is
generated.
jnxSoamDmThresholdCfgEntry 3jnxSoamDmThresholdCfgAvgFrameDelayTwoWayThreshold
1225Copyright © 2017, Juniper Networks, Inc.
Chapter 34: Configuring Operations, Administration, and Management (OAM)

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English