Juniper ACX2000

neighbor 192.0.2.2;
}
}
}
}
}
4. On PE-r Router PE4, configure a routing instance like the one on Router PE3.
routing-instances {
H-VPLS {
instance-type vpls;
interface ge-2/1/7.0;
route-distinguisher 192.0.2.4:44;
vrf-target target:64510:2;
protocols {
vpls {
site pe4 {
site-identifier 4;
interface ge-2/1/7.0;
}
mesh-group pe1 {
vpls-id 100;
neighbor 192.0.2.1;
}
mesh-group pe2 {
vpls-id 200;
neighbor 192.0.2.2;
}
}
}
}
}
Copyright © 2017, Juniper Networks, Inc.1288
ACX Series Universal Access Router Configuration Guide