Juniper ACX2000

The relevant sample configuration for Device CE2 follows.
Router CE2 interfaces {
ge-2/1/5 {
unit 0 {
description to_PE2;
family inet {
address 172.16.0.2/24;
}
}
}
lo0 {
unit 0{
family inet {
address 10.255.14.215/32;
}
}
}
}
protocols {
ospf {
area 0.0.0.0 {
interface lo0.0 {
passive;
}
interface ge-2/1/5.0;
}
}
}
The relevant sample configuration for Device CE3 follows.
Router CE3 interfaces {
ge-2/0/9 {
unit 0 {
description to_PE3;
family inet {
address 172.16.0.3/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 10.255.14.218/32;
}
}
}
}
protocols {
ospf {
area 0.0.0.0 {
interface lo0.0 {
passive;
}
interface ge-2/0/9.0;
1303Copyright © 2017, Juniper Networks, Inc.
Chapter 35: Configuring Virtual Private LAN Service