NOTE: The Test Status field indicates the status of the TDR test, not the
cable. The value Passed means the test completed—it does not mean that
the cable has no faults.
The following is additional information about the TDR test:
• The TDR test can take some seconds to complete. If the test is still running when you
execute the show diagnostics tdr command, the Test status field displays Started. For
example:
user@host> show diagnostics tdr interface ge-0/0/22
Interface TDR detail:
Interface name : ge-0/0/22
Test status : Started
• You can terminate a running TDR test before it completes by using the request
diagnostics tdr abort interface interface-name command. The test terminates with no
results, and the results from any previous test are cleared.
• You can display summary information about the last TDR test results for all interfaces
on the router that support the TDR test by not specifying an interface name with the
show diagnostics tdr command. For example:
user@host> show diagnostics tdr
Interface Test status Link status Cable status Max distance fault
ge-0/0/0 Passed UP OK 0
ge-0/0/1 Not Started N/A N/A N/A
ge-0/0/2 Passed UP OK 0
ge-0/0/3 Not Started N/A N/A N/A
ge-0/0/4 Passed UP OK 0
ge-0/0/5 Passed UP OK 0
ge-0/0/6 Passed UP OK 0
ge-0/0/7 Not Started N/A N/A N/A
ge-0/0/8 Passed Down OK 0
ge-0/0/9 Not Started N/A N/A N/A
ge-0/0/10 Passed Down Fault 1
ge-0/0/11 Passed UP OK 0
ge-0/0/12 Not Started N/A N/A N/A
ge-0/0/13 Not Started N/A N/A N/A
ge-0/0/14 Not Started N/A N/A N/A
ge-0/0/15 Not Started N/A N/A N/A
ge-0/0/16 Not Started N/A N/A N/A
ge-0/0/17 Not Started N/A N/A N/A
ge-0/0/18 Not Started N/A N/A N/A
ge-0/0/19 Passed Down OK 0
ge-0/0/20 Not Started N/A N/A N/A
ge-0/0/21 Not Started N/A N/A N/A
ge-0/0/22 Passed UP OK 0
ge-0/0/23 Not Started N/A N/A N/A
Copyright © 2017, Juniper Networks, Inc.1332
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
