Juniper ACX2000 Configuration Guide

profiles {
test-profile throughput {
test-type throughput
packet-size 64;
test-duration 20m;
bandwidth-kbps 500;
}
}
tests {
test-name test1 {
interface ge-0/0/0.1;
test-profile throughput;
mode initiate,terminate;
family ccc;
direction nni;
}
}
}
Configuring Benchmarking Test Parameters on Router B:
[edit interfaces]
ge-0/0/4 {
vlan-tagging;
unit 0 {
encapsulation vlan-ccc;
vlan-id 101;
}
}
[edit services rpm]
rfc2544-benchmarking {
# Note, When in reflector mode, test profile is not needed
tests {
test-name test1 {
interface ge-0/0/4.1;
mode reflect;
family ccc;
direction nni;
}
}
}
After you have configured the device, enter the commit command in configuration mode.
Verifying the Results of the Benchmarking Test for NNI Direction of an Ethernet Pseudowire
Service
Examine the results of the benchmarking test that is performed on the configured service
between Router A and Router B.
•
Verifying the Benchmarking Test Results on page 1375
Copyright © 2017, Juniper Networks, Inc.1374
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English